DEALER LOGIN

Tour AD TP
 

【TP-4/5】 Boasting stable shaft running and flight distance, even with light weight, it returns smoothly and firmly, enabling strong trajectory with stable impact.

【TP-6/7/8】 With a quiet behavior that naturally returns the head even if you hit it, you realized the lowest loss trajectory and maximum flying distance that enabled stable impact even if you shake it.

【NEW】 TP series released in October 2016!

"Tour AD TP" has reduced ballistic delay by returning quiet and no return as it matched the long trend, and improved the ball meet rate by further adding high-end high-rigidity. In addition, we have changed from the "TP" series to the new Tour AD logo and added freshness to the series.

  • About cutting method of the shaft When using for 1 W, it is basically not necessary to cut the tip. ? Also when using it for FW etc. please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft tip.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc
 
 
model Weight (g) Torque (deg) Tip diameter / Parallel (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
TP-4 46 5.7 8.50 / 75 15.10 R2 Medium tone 1168
47 R1
48 5.6 15.15 S
TP-5 54 4.4 15.15 R2
56 15.20 R1
57 15.25 S
58 15.30 X
TP-6 64 3.2 15.15 SR
65 15.20 S
67 15.25 X
TP-7 73 3.0 15.25 S
75 15.30 X
TP-8 85 2.6 15.25 S
87 15.30 X