Tour AD PT


【PT-5 / PT-6】 Tour model pursuing kindness
There is no habit, realizing the goodness of grasping of the ball with ease of timing and stable trajectory. Increasing the rigidity of the shaft tip makes it possible to stabilize the launch angle and the backspin amount by suppressing the blur of the head when the sweet spot is removed, and a strong trajectory with straight traveling ability is possible. 
【PT-7 / PT-8】 PT series for hard hitters
We realized a stable strong trajectory with a sense of weight, realizing the grip of the ball. Like the PT 5, 6, as the rigidity of the tip part is increased, it suppresses the blur of the head and realizes a strong trajectory with straightness.

* There is no change in the shaft specifications by changing only the color.

  • Basically there is no need for chip cutting about the shaft cutting method. When using it for FW etc., please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft front end part.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.
model Weight 
Tip diameter / Parallel 
Butt diameter 
flex Kick 
Shaft length (mm)
PT-5 52 5.8 8.50 / 100 15.30 R2 Medium tone 1168
53 R1
54 15.35 S
PT-6 62 3.6 15.20 SR
63 3.5 15.25 S
64 X
PT-7 72 3.4 15.30 S
73 3.3 X
PT-8 81 3.2 15.40 S
83 3.1 X