Tour AD GP


【GP-4/5/6】 Realized a stable trajectory by fusing the supple and strength of the lightweight shaft.

【GP-7/8】 Offensive strong against the center hit, realizing strong trajectory with no impact loss.

【NEW】 GP4 series Release on March 10, 2016!

"Tour AD GP" is designed not to beat off center hit due to high rigidity at the tip. 
It is a shaft that prevents swinging delay by raising the rigidity of the hand (inside the grip), and feels a bend from under the grip to the middle part. Also, since the behavior of the shaft stabilizes, power is transmitted directly to the ball, the initial speed increases, enabling a large flight distance with a strong trajectory.

  • About cutting method of the shaft When using for 1 W, it is basically not necessary to cut the tip. ? Also when using it for FW etc. please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft tip.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.


model Weight (g) Torque (deg) Tip diameter / Parallel (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
GP-4 47 5.7 8.50 / 75 15.05 R2 Medium tone 1168
15.10 R1
48 15.15 S
GP-5 55 4.3 15.15 R2
56 R1
57 15.20 S
GP-6 64 3.1 15.20 SR
66 15.25 S
67 15.30 X
GP-7 75 2.9 15.30 S
76 15.35 X
GP-8 84 2.7 15.40 S
85 15.45 X