Tour AD DI


【DI-5 / DI-6】 Emphasize the bending, suppress the shake at the impact to the utmost and upgrade the controllability 
Increase the image by pressing the ball with the impact by maintaining the bending of the whole shaft during the swing Shaft that increased controllability. 
【DI-7 / DI-8】 High rigidity at the tip by nanotechnology. New dimension emphasizing deep and thick impact with core
Depth and emphasis on the flexure of the whole shaft, making full use of nanotechnology at the tip, increasing the rigidity by using highly elasticized resin, shake the head at impact To the limit, realizing a deeper and thicker impact with a core.

  • About cutting method of the shaft When using for 1 W, it is basically not necessary to cut the tip. ? Also when using it for FW etc. please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft tip.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.
model Weight 
Tip diameter / Parallel 
Butt diameter 
flex Kick 
Shaft length (mm)
DI-5 54 4.7 8.50 / 75 15.10 R2 Medium tone 1168
55 15.15 R1
57 15.20 S
DI-6 64 3.4 15.20 SR
65 3.3 15.25 S
67 15.30 X
DI-7 74 3.2 15.25 S
75 3.1 15.30 X
DI-8 84 3.0 15.35 S
85 2.9 15.40 X