DEALER LOGIN

Tour AD M9003
 

 

It increased the rigidity from the tip part to the middle part, realizing a stickiness unique to the former tone. In addition, it was able to store power from turnover, and to transmit powerfully to the ball with impact. It combines playing and stickiness with high elasticity material, it is a satisfying shaft for power hitter, which can aim the target to pinpoint.

  • About cutting method of the shaft When using for 1 W, it is basically not necessary to cut the tip. ? Also when using it for FW etc. please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft tip.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.
 
model Weight (g) Torque (deg) Tip diameter / Parallel (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
M9003 68 3.1 8.50 / 75 15.30 6S Former health condition 1170
69 15.35 6X
76 2.4 15.25 7S
78 15.30 7X