DEALER LOGIN

Tour AD HY HYBRID
 

 

【HY-65 / HY-75】
Designed supple entire shaft to realize high trajectory high, strong and supple . Possible trajectory according to the image of Hybrid. 


【HY-85 / HY-95】
Next-generation shaft condensing elements necessary for straight advance and sticky hybrid shafts. By strengthening the stickiness of the shaft as a whole and the rigidity of the tip, it achieves both straightforwardness and operability.

  • Basically there is no need for chip cutting about the shaft cutting method. When using it for FW etc., please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft front end part.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.

model Weight 
(g)
Torque 
(deg)
Tip diameter / Parallel 
(mm)
Butt diameter 
(mm)
flex Kick 
point
Shaft length (mm)
HY-65 67 3.5 9.40 / 75 15.25 R Medium tone 1070
S
HY-75 77 3.1 15.15 R
78 15.20 S
HY-85 88 2.4 15.25 R
S
89 15.30 X
HY-95 97 2.1 15.15 S
98 15.20 X