DEALER LOGIN

Tour AD AD - 55 / AD - 65 Type II / AD - 75 / AD - 85 / AD - 95
 

 

[AD - 55] Excellent sense of stability in easiness to swing
Use nanotechnology - material at the tip and reduce stiffness by impact by enhancing rigidity. While maintaining a moderate feeling while being lightweight, it brings out the performance to the maximum, achieving both distance and directionality. We emphasize the feeling of swing, combine gentleness and operability, and correspond to a wider player. 
[AD - 65 Type II] AD Iron Series Lightweight Model
Easy to strike and easy to swing and aim at the pin with high trajectory. Use a wide range of players Carriage dedicated to lightweight irons that improves distance and direction. 
[AD - 75]
Constant weight shaft which puts the weight zone which brings ideal trajectory and flight distance to anyone in thelatter half of 70 g - the first half of 80 g. It is characterized by a very stable performance that can be used by a wide range of players. Also, the balance point is 46%. Solved the problem that the club balance did not come out with lightweight steel shaft and carbon shaft until now. 
【AD - 85】 Shaft
for shaft for high performance iron which fully demonstrated the free design of carbon shaft which is beyond steelshaft. As for the AD 75, the balance point is set to 46%, and high trajectory design that emphasizes the feeling of swinging. 
【AD-95】 Ballistic trait with excellent sense of directionality and sense of stability
Add stability and sense of weight, superior controllability, high stability with a high trajectory, aim the target as desired with pinpoint. Shaft for high performance irons.

  • About cutting method of the shaft When using for 1 W, it is basically not necessary to cut the tip. ? Also when using it for FW etc. please adjust the hardness within the range where the insertion length into the hosel + tip cutting does not exceed the parallel length of the shaft tip.
  • Please be aware that inserting into the hosel beyond the parallel length to the shaft tip end, inserting it into the hosel after cutting the tip end of the shaft more than the painted surface may lead to breakage of the shaft.
  • Please be careful because it will cause shaft crack if tightening the shaft too strongly when assembling the club, measuring the frequency, changing the grip, etc.
 
Standard model  

Make-to-order model
 
MJMT
DI
 


AD-55

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 57

 

3.3 9.10 / 35 14.95 R Medium tone 990
# 4 3.2 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 58 915
# 10 14.90 905

 

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 58 3.2 9.10 / 35 15.00 S Medium tone 990
# 4 59 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 3.1 915
# 10 905

 

AD-65 Type II

  Weight (g) Torque (deg) Tip diameter / taper length 
(mm)
Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 67 2.7 9.10 / 50 14.85 R Medium tone 990
# 4 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 2.6 14.80 915
# 10 2.5 905

 

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 68 2.6 9.10 / 50 14.85 S Medium tone 990
# 4 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 2.5 14.80 915
# 10 905

 

AD-75

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 78 2.8 9.10 / 35 15.05 R Medium tone 990
# 4 980
# 5 965
# 6 79 955
# 7 940
# 8 80 930
# 9 915
# 10 905

 

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 79 2.8 9.10 / 35 15.05 S Medium tone 990
# 4 980
# 5 965
# 6 955
# 7 80 940
# 8 930
# 9 915
# 10 905

 

AD-85

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 88 2.8 9.10 / 35 15.00 R Medium tone 990
# 4 980
# 5 2.4 15.05 965
# 6 955
# 7 940
# 8 930
# 9 915
# 10 905

 

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 89 2.8 9.10 / 35 15.00 S Medium tone 990
# 4 980
# 5 2.4 15.05 965
# 6 955
# 7 940
# 8 930
# 9 915
# 10 905

 

AD-95

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 98 2.2 9.10 / 35 15.05 S Nakamoto Yoshiko 990
# 4 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 915
# 10 905

 

  Weight (g) Torque (deg) Tip diameter / taper length (mm) Butt diameter (mm) flex Kick point Shaft length (mm)
# 3 99 2.2 9.10 / 35 15.10 X Nakamoto Yoshiko 990
# 4 980
# 5 965
# 6 955
# 7 940
# 8 930
# 9 915
# 10 905