Fujikura MCI Series


An innovative iron that balances "bending" and "operability".


MCT® (Metal Composite Technology) realized the balance optimization of "bending" and "operability".
Because there is a "bending" characteristic of carbon, it is easy to pick up spheres, it is easy to spin, furthermore it is possible to separate every sphere with optimization of the center of gravity position, and it is a shaft for innovative iron which can aim the pin firmly .

MCT® (Metal Composite Technology)

The carbon shaft becomes the center of gravity of the hand compared with the steel shaft, and it influences the swing weight of the club. If you wind a lot of fibers at the tip to improve it, the rigidity will be high and there is a harmful effect of impairing feeling. With the development of "MCT", it became possible to balance both the adjustment of the position of the center of gravity of the shaft and the high controllability by "smooth motion" which is the feature of the carbon shaft.

Fujikura EVOLUTION lll

Fujikura EVOLUTION lll



model flex Product length weight torque Tip diameter Butt diameter Condition Curvature distribution curve
MCI 50 R 39.0 - 35.5 55.0 3.5 to 3.3 9.35 14.90 Before
S 57.0 15.00
MCI 60 R 65.0 3.2 - 2.8 15.10 Before
S 67.0 15.20
MCI 70 R 73.0 3.0 to 2.6 15.10 Before
S 75.0 15.20
MCI 80 R 84.0 2.9 to 2.5 15.00 During ~
S 86.0 15.10
MCI 90 R 92.0 2.8 to 2.4 15.10 During ~
S 94.0 15.20
MCI 100 S 104.0 2.8 to 2.4 15.10 During ~
X 106.0 15.20
MCI 110 S 113.0 2.6 to 2.2 15.10 During ~
X 115.0 15.20
MCI 120 S 122.0 2.5 to 2.1 15.10 Middle-class
X 124.0 15.20