Golf Shafts Asia YouTube Facebook Instagram

FINISHING BELTS

A1306xFSR Non Woven Polyamide Fibre

USD $0

Non Woven soft Polyamide fibre belts are ideal for cleaning heavily soiled clubheads. Its also very good at removing paint and hard epoxy off graphite shaft tips without cutting into the fibre. Our Polyamide Fibre belts are as good as replacement for 3M Scotchbright belts.

A1306xFF Finishing Felt Belt

USD $0

Low stretch durable 5 mm thick felt belts used for polishing metals as well as plastic. Polishing compound must be used for best effect. Polishing heads with felt belt is much cleaner and safer than buffing wheels when detailing assembled clubs.

A1306xFFC Buffing and Polishing compound

USD $0

Dry compound applied in steps on felt belt used for buffing club heads to a mirror like finish. Apply compound by dragging the bar over the belt, than work the clubhead while applying light pressure against the belt. Use one belt for each compound used.

A1306xFL Ferrule Finishing White Linen (Soft)

USD $0

White Linen belts are the preferred medium for thinning down and blending ferrules without scratching the hosel or shaft. Soft and flexible, the belt follows the contour easily under light pressure, which prevents burn marks and an uneven finish

A1306xFLS Ferrule Finisning Linen (Stiff)

USD $0

Ferrule finishing Linen Belt bound to a stiff cotton / Polyester backing that has very little stretch or that warps easily, giving the experienced clubmaker more control when touching up minor imperfections. This belt is also recommanded for prepping uncoated graphite shaft tips. Last longer than standard white linen belts but care must be taken not to drag over belt as this can leave stop marks.

A1306xMG30 Micro Grit 30 Micron by 3M

USD $0

30 micron super-hard oxide that’s excellent for prepping graphite shaft tips, and removing minor scratches off club heads. This belt is very flexible and can easily follow the contours of a club-head. Not suitable for irons with a mirror like finish.

A1306xN264 Norax Tri Helical U264 by Norton

USD $0

Norax Tri-Helical X16 is the belt for restoring a satin finish on dulled clubheads and for prepping coated graphite shaft tips without cutting into the fibre. Good for removing oxides off unpainted clubheads. Lasts 5 times longer than coated belts

A1306xT307 Trizact T307 by 3M

USD $0

A soft flexible belts ideal for intermediate finishing prior to buffing heads to a mirror like finish. Trizact is suitable for refinishing hard alloyed irons (stainless & maraging). Also works for polishing titanium heads to a satin finish. Can be used for prepping shafts.

A1306xG060 60 Grit Aluminium Oxyde Bellts

USD $0

60 Grit Shaft tip prepping and de-burring belt for Steel shafts. Bites into the chrome leaving a rough surface for the epoxy to grip to. 60G is best Used on thick walled, heavier to medium weight steel shafts. These belts are very durable yet flexible enough to work A shaft tip without turning it out of round.

A1306xG080 80 Grit Aluminium Oxyde Belts

USD $0

80 Grit Shaft tip prepping and de-burring belt for Steel shafts. 80G Does not bite as hard into the chrome, leaving a moderatly rough surface. Best used with medium light weight steel shafts.

A1306xG120 120 Grit Aluminium Oxyde Belts

USD $0

120 Grit is a good compromise for prepping steel and graphite shafts and can be used to remove hardened epoxy on shafts that are to be re-installed.

A1306xG240 240 Grit Aluminium Oxyde Belts

USD $0

240 Grit is ideal for removing thick film coating off graphite shafts, while leaving a slight textured surface for the epoxy to adhere to. When prepping Graphite Shaft tips; apply light pressure with continous rotation. This will prevent the coating from melting and adhering to the belt.